NSComm MPO Jumper Cables, MPO-16 APC (Female) to MPO-16 APC (Female), 16 Fibers, Multimode (OM4), OFNR, Low Loss, Crossover
Overview
The NSComm MPO-16 APC (Female) to MPO-16 APC (Female) low loss jumper cable is a high-density OM4 multimode interconnect designed for next-generation 400G data center networks. With 16-fiber MPO-16 APC connectors on both ends and OM4 50/125 μm bend-insensitive multimode fiber, this jumper is optimized for parallel optics deployments that demand tight power budgets, clean signal integrity, and compact cabling in spine–leaf architectures.
Factory-terminated and fully tested, the MPO-16 APC jumper features an 8-degree angled endface that helps deflect internal back reflections away from the transceiver, reducing signal distortion at 400G line rates. A riser-rated OFNR jacket and crossover polarity make it ideal for 16-fiber parallel multimode optical transceiver applications such as 400G QSFP-DD/OSFP SR8 optics transmission in high-speed, short-reach data center links.
Need help confirming crossover polarity, MPO keying, or SR8 transceiver compatibility? Contact us now and our team will help validate your design before deployment.
Key Specifications
| Specification | Details |
|---|---|
| Vendor Name | NSComm |
| Product Type | MPO-16 APC (Female) to MPO-16 APC (Female) Multimode Jumper Cable |
| Connector A | MPO-16 APC Female (Pinless) with Offset Key, Low Loss |
| Connector B | MPO-16 APC Female (Pinless) with Offset Key, Low Loss |
| Polish Type | APC to APC, 8° angled endface |
| Fiber Mode | OM4 50/125 μm Multimode |
| Glass Fiber | Bend-insensitive multimode fiber |
| Wavelength | 850 nm / 1300 nm |
| Fiber Count | 16 Fibers |
| Polarity | Crossover |
| Cable Outside Diameter (OD) | 3.0 mm |
| Cable Jacket | Riser-rated, OFNR |
| Min. Bend Radius (Optical Fiber) | 7.5 mm |
| Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Connector Durability | 500 mating cycles |
| Tensile Strength | 80/240 N (Long/Short Term) |
| Insertion Loss | Low Loss, ≤ 0.35 dB Max (Typ. 0.15 dB) |
| Return Loss | ≥ 20 dB |
| Attenuation @ 850 nm | ≤ 2.3 dB/km |
| Attenuation @ 1300 nm | ≤ 0.6 dB/km |
| Operating Temperature | -10 to 60 °C (14 to 140 °F) |
| Storage Temperature | -10 to 70 °C (14 to 158 °F) |
| Standards Compliance | MPO interface standards, OM4/MMF, RoHS compliant |
| Applications | 400G QSFP-DD/OSFP SR8 links, 16-fiber parallel MM, high-speed leaf–spine fabrics |
Why Choose NSComm MPO-16 APC Low Loss OM4 Jumper?
-
Optimized for 400G SR8 multimode – Purpose-built for 16-fiber parallel MM applications using 400G QSFP-DD/OSFP SR8 optics.
-
Angled APC 8° polish – Helps minimize back reflection into the transceiver, improving high-speed signal quality.
-
High-density OM4 design – MPO-16 format supports more channels per connector for dense panels and spine switches.
-
Low-loss, factory-terminated assembly – 100% tested to meet strict insertion loss and return loss requirements.
-
Bend-insensitive OM4 fiber – Delivers stable performance in tight routing and high-density cable management paths.
-
Riser-rated OFNR construction – Suitable for structured cabling, riser routes, and in-rack patching in large data centers.
Length Options
Standard stocked lengths:
Offered in commonly used MPO jumper lengths tailored for short-reach 400G SR8 links within racks and between adjacent racks in high-density environments.
Custom lengths:
Custom lengths, labeling, and configurations are available on request to match your patch panel layouts, trunk designs, and transceiver locations.
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by Certified CCIE / HCIE / RCNP Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your NSComm products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
NSComm MPO Jumper Cables, MPO-16 APC (Female) to MPO-16 APC (Female), 16 Fibers, Multimode (OM4), OFNR, Low Loss, Crossover
NSComm MPO Jumper Cables, MPO-16 APC (Female) to MPO-16 APC (Female), 16 Fibers, Multimode (OM4), OFNR, Low Loss, Crossover
Overview
The NSComm MPO-16 APC (Female) to MPO-16 APC (Female) low loss jumper cable is a high-density OM4 multimode interconnect designed for next-generation 400G data center networks. With 16-fiber MPO-16 APC connectors on both ends and OM4 50/125 μm bend-insensitive multimode fiber, this jumper is optimized for parallel optics deployments that demand tight power budgets, clean signal integrity, and compact cabling in spine–leaf architectures.
Factory-terminated and fully tested, the MPO-16 APC jumper features an 8-degree angled endface that helps deflect internal back reflections away from the transceiver, reducing signal distortion at 400G line rates. A riser-rated OFNR jacket and crossover polarity make it ideal for 16-fiber parallel multimode optical transceiver applications such as 400G QSFP-DD/OSFP SR8 optics transmission in high-speed, short-reach data center links.
Need help confirming crossover polarity, MPO keying, or SR8 transceiver compatibility? Contact us now and our team will help validate your design before deployment.
Key Specifications
| Specification | Details |
|---|---|
| Vendor Name | NSComm |
| Product Type | MPO-16 APC (Female) to MPO-16 APC (Female) Multimode Jumper Cable |
| Connector A | MPO-16 APC Female (Pinless) with Offset Key, Low Loss |
| Connector B | MPO-16 APC Female (Pinless) with Offset Key, Low Loss |
| Polish Type | APC to APC, 8° angled endface |
| Fiber Mode | OM4 50/125 μm Multimode |
| Glass Fiber | Bend-insensitive multimode fiber |
| Wavelength | 850 nm / 1300 nm |
| Fiber Count | 16 Fibers |
| Polarity | Crossover |
| Cable Outside Diameter (OD) | 3.0 mm |
| Cable Jacket | Riser-rated, OFNR |
| Min. Bend Radius (Optical Fiber) | 7.5 mm |
| Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Connector Durability | 500 mating cycles |
| Tensile Strength | 80/240 N (Long/Short Term) |
| Insertion Loss | Low Loss, ≤ 0.35 dB Max (Typ. 0.15 dB) |
| Return Loss | ≥ 20 dB |
| Attenuation @ 850 nm | ≤ 2.3 dB/km |
| Attenuation @ 1300 nm | ≤ 0.6 dB/km |
| Operating Temperature | -10 to 60 °C (14 to 140 °F) |
| Storage Temperature | -10 to 70 °C (14 to 158 °F) |
| Standards Compliance | MPO interface standards, OM4/MMF, RoHS compliant |
| Applications | 400G QSFP-DD/OSFP SR8 links, 16-fiber parallel MM, high-speed leaf–spine fabrics |
Why Choose NSComm MPO-16 APC Low Loss OM4 Jumper?
-
Optimized for 400G SR8 multimode – Purpose-built for 16-fiber parallel MM applications using 400G QSFP-DD/OSFP SR8 optics.
-
Angled APC 8° polish – Helps minimize back reflection into the transceiver, improving high-speed signal quality.
-
High-density OM4 design – MPO-16 format supports more channels per connector for dense panels and spine switches.
-
Low-loss, factory-terminated assembly – 100% tested to meet strict insertion loss and return loss requirements.
-
Bend-insensitive OM4 fiber – Delivers stable performance in tight routing and high-density cable management paths.
-
Riser-rated OFNR construction – Suitable for structured cabling, riser routes, and in-rack patching in large data centers.
Length Options
Standard stocked lengths:
Offered in commonly used MPO jumper lengths tailored for short-reach 400G SR8 links within racks and between adjacent racks in high-density environments.
Custom lengths:
Custom lengths, labeling, and configurations are available on request to match your patch panel layouts, trunk designs, and transceiver locations.
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by Certified CCIE / HCIE / RCNP Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your NSComm products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Original: $186.00
-65%$186.00
$65.10Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Overview
The NSComm MPO-16 APC (Female) to MPO-16 APC (Female) low loss jumper cable is a high-density OM4 multimode interconnect designed for next-generation 400G data center networks. With 16-fiber MPO-16 APC connectors on both ends and OM4 50/125 μm bend-insensitive multimode fiber, this jumper is optimized for parallel optics deployments that demand tight power budgets, clean signal integrity, and compact cabling in spine–leaf architectures.
Factory-terminated and fully tested, the MPO-16 APC jumper features an 8-degree angled endface that helps deflect internal back reflections away from the transceiver, reducing signal distortion at 400G line rates. A riser-rated OFNR jacket and crossover polarity make it ideal for 16-fiber parallel multimode optical transceiver applications such as 400G QSFP-DD/OSFP SR8 optics transmission in high-speed, short-reach data center links.
Need help confirming crossover polarity, MPO keying, or SR8 transceiver compatibility? Contact us now and our team will help validate your design before deployment.
Key Specifications
| Specification | Details |
|---|---|
| Vendor Name | NSComm |
| Product Type | MPO-16 APC (Female) to MPO-16 APC (Female) Multimode Jumper Cable |
| Connector A | MPO-16 APC Female (Pinless) with Offset Key, Low Loss |
| Connector B | MPO-16 APC Female (Pinless) with Offset Key, Low Loss |
| Polish Type | APC to APC, 8° angled endface |
| Fiber Mode | OM4 50/125 μm Multimode |
| Glass Fiber | Bend-insensitive multimode fiber |
| Wavelength | 850 nm / 1300 nm |
| Fiber Count | 16 Fibers |
| Polarity | Crossover |
| Cable Outside Diameter (OD) | 3.0 mm |
| Cable Jacket | Riser-rated, OFNR |
| Min. Bend Radius (Optical Fiber) | 7.5 mm |
| Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Connector Durability | 500 mating cycles |
| Tensile Strength | 80/240 N (Long/Short Term) |
| Insertion Loss | Low Loss, ≤ 0.35 dB Max (Typ. 0.15 dB) |
| Return Loss | ≥ 20 dB |
| Attenuation @ 850 nm | ≤ 2.3 dB/km |
| Attenuation @ 1300 nm | ≤ 0.6 dB/km |
| Operating Temperature | -10 to 60 °C (14 to 140 °F) |
| Storage Temperature | -10 to 70 °C (14 to 158 °F) |
| Standards Compliance | MPO interface standards, OM4/MMF, RoHS compliant |
| Applications | 400G QSFP-DD/OSFP SR8 links, 16-fiber parallel MM, high-speed leaf–spine fabrics |
Why Choose NSComm MPO-16 APC Low Loss OM4 Jumper?
-
Optimized for 400G SR8 multimode – Purpose-built for 16-fiber parallel MM applications using 400G QSFP-DD/OSFP SR8 optics.
-
Angled APC 8° polish – Helps minimize back reflection into the transceiver, improving high-speed signal quality.
-
High-density OM4 design – MPO-16 format supports more channels per connector for dense panels and spine switches.
-
Low-loss, factory-terminated assembly – 100% tested to meet strict insertion loss and return loss requirements.
-
Bend-insensitive OM4 fiber – Delivers stable performance in tight routing and high-density cable management paths.
-
Riser-rated OFNR construction – Suitable for structured cabling, riser routes, and in-rack patching in large data centers.
Length Options
Standard stocked lengths:
Offered in commonly used MPO jumper lengths tailored for short-reach 400G SR8 links within racks and between adjacent racks in high-density environments.
Custom lengths:
Custom lengths, labeling, and configurations are available on request to match your patch panel layouts, trunk designs, and transceiver locations.
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by Certified CCIE / HCIE / RCNP Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your NSComm products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
