NSComm MPO 16F APC to 2xMPO 8F APC Breakout Cables, 8 Fibers, Multimode (OM4), OFNR, Crossover
Overview
The NSComm MPO 16F APC to 2xMPO 8F APC breakout cable is a high-density OM4 multimode splitter solution engineered for 400G/800G data center architectures. With one 16-fiber MPO-16 APC (Female) trunk breaking out to two 8-fiber MPO-8 APC (Female) legs, this assembly supports 16-fiber parallel optics in a compact, factory-terminated form factor that simplifies high-speed backbone design. The MPO-16 APC end features an 8-degree angled polish to deflect internal back reflections away from the transceiver, helping preserve signal integrity at very high line rates.
Built with bend-insensitive OM4 50/125 ÎĽm multimode fiber and a riser-rated OFNR jacket, this crossover breakout cable is purpose-built for linking two 400G QSFP-DD/OSFP multimode transceivers to a single 800G QSFP-DD optics port in high-speed fiber links. Compared with deploying separate breakout cassettes, MPO-based breakout cables reduce the number of mated interfaces, resulting in lower overall insertion loss, reduced latency, and lower material and installation costs, ideal for hyperscale and large enterprise data centers.
Need help validating crossover polarity, channel mapping, or compatibility with your 400G/800G SR8 optics? Contact us now and our team will help review your design before deployment.
Key Specifications
| Specification | Details |
|---|---|
| Vendor Name | NSComm |
| Product Type | MPO 16F APC to 2xMPO 8F APC Multimode Breakout Cable |
| Connector A | MPO-16 APC Female (Pinless) with Offset Key, Low Loss |
| Connector B | 2 Ă— MPO-8 APC Female (Pinless), Low Loss |
| Polish Type | APC to APC, 8° angled endfaces |
| Fiber Mode | OM4 50/125 ÎĽm Multimode |
| Glass Fiber | Bend-insensitive multimode fiber |
| Wavelength | 850 nm / 1300 nm |
| Fiber Count | 16 Fibers total (1Ă—16F trunk to 2Ă—8F breakout) |
| Polarity | Crossover |
| 400G Ethernet Distance | Up to 50/100 m at 850 nm (application dependent) |
| 800G Ethernet Distance | Up to 50 m at 850 nm (application dependent) |
| Cable Outside Diameter (OD) | 3.0 mm (trunk, typical) |
| Cable Jacket | Riser-rated, OFNR |
| Minimum Bend Radius | 7.5 mm |
| Breakout Length | 0.5 m (typical breakout leg length) |
| Installation Tensile Load | 66 N |
| Tensile Strength | 60/120 N (Long/Short Term) |
| Insertion Loss | Low Loss, ≤ 0.35 dB Max (Typ. 0.15 dB) |
| Return Loss | ≥ 45 dB (APC) |
| Attenuation @ 850 nm | ≤ 2.3 dB/km |
| Attenuation @ 1300 nm | ≤ 0.6 dB/km |
| Operating Temperature | -10 to 60 °C (14 to 140 °F) |
| Storage Temperature | -10 to 70 °C (14 to 158 °F) |
| Standards Compliance | MPO interface standards, OM4/MMF, RoHS compliant |
| Applications | 2×400G to 1×800G fanout, parallel MM backbone, high-speed leaf–spine/inter-switch links |
Why Choose NSComm MPO 16F to 2xMPO 8F APC OM4 Breakout Cables?
-
Designed for 400G/800G fanout – Ideal for aggregating two 400G QSFP-DD/OSFP multimode ports into a single 800G QSFP-DD link.
-
Crossover breakout architecture – Pre-engineered crossover polarity simplifies direct device-to-device parallel optics connections.
-
Lower loss than cassette-based solutions – Direct breakout reduces mated interfaces, improving insertion loss and overall link margin.
-
8° APC angled polish – High return-loss APC interface helps minimize back reflections and maintain clean multimode signals.
-
Bend-insensitive OM4 multimode fiber – Ensures stable performance in tight pathways and dense patch field environments.
-
Riser-rated OFNR construction – Suitable for structured cabling, in-rack routing, and data center riser pathways.
Length Options
Standard stocked lengths:
Available in common trunk and breakout lengths suited for typical 400G/800G switch-to-switch and switch-to-transceiver fanout scenarios within and between racks.
Custom lengths:
Custom trunk lengths, breakout leg lengths, labeling, and connector configurations are available on request to match your panel layouts, routing paths, and optics locations.
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by Certified CCIE / HCIE / RCNP Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your NSComm products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
NSComm MPO 16F APC to 2xMPO 8F APC Breakout Cables, 8 Fibers, Multimode (OM4), OFNR, Crossover
NSComm MPO 16F APC to 2xMPO 8F APC Breakout Cables, 8 Fibers, Multimode (OM4), OFNR, Crossover
Overview
The NSComm MPO 16F APC to 2xMPO 8F APC breakout cable is a high-density OM4 multimode splitter solution engineered for 400G/800G data center architectures. With one 16-fiber MPO-16 APC (Female) trunk breaking out to two 8-fiber MPO-8 APC (Female) legs, this assembly supports 16-fiber parallel optics in a compact, factory-terminated form factor that simplifies high-speed backbone design. The MPO-16 APC end features an 8-degree angled polish to deflect internal back reflections away from the transceiver, helping preserve signal integrity at very high line rates.
Built with bend-insensitive OM4 50/125 ÎĽm multimode fiber and a riser-rated OFNR jacket, this crossover breakout cable is purpose-built for linking two 400G QSFP-DD/OSFP multimode transceivers to a single 800G QSFP-DD optics port in high-speed fiber links. Compared with deploying separate breakout cassettes, MPO-based breakout cables reduce the number of mated interfaces, resulting in lower overall insertion loss, reduced latency, and lower material and installation costs, ideal for hyperscale and large enterprise data centers.
Need help validating crossover polarity, channel mapping, or compatibility with your 400G/800G SR8 optics? Contact us now and our team will help review your design before deployment.
Key Specifications
| Specification | Details |
|---|---|
| Vendor Name | NSComm |
| Product Type | MPO 16F APC to 2xMPO 8F APC Multimode Breakout Cable |
| Connector A | MPO-16 APC Female (Pinless) with Offset Key, Low Loss |
| Connector B | 2 Ă— MPO-8 APC Female (Pinless), Low Loss |
| Polish Type | APC to APC, 8° angled endfaces |
| Fiber Mode | OM4 50/125 ÎĽm Multimode |
| Glass Fiber | Bend-insensitive multimode fiber |
| Wavelength | 850 nm / 1300 nm |
| Fiber Count | 16 Fibers total (1Ă—16F trunk to 2Ă—8F breakout) |
| Polarity | Crossover |
| 400G Ethernet Distance | Up to 50/100 m at 850 nm (application dependent) |
| 800G Ethernet Distance | Up to 50 m at 850 nm (application dependent) |
| Cable Outside Diameter (OD) | 3.0 mm (trunk, typical) |
| Cable Jacket | Riser-rated, OFNR |
| Minimum Bend Radius | 7.5 mm |
| Breakout Length | 0.5 m (typical breakout leg length) |
| Installation Tensile Load | 66 N |
| Tensile Strength | 60/120 N (Long/Short Term) |
| Insertion Loss | Low Loss, ≤ 0.35 dB Max (Typ. 0.15 dB) |
| Return Loss | ≥ 45 dB (APC) |
| Attenuation @ 850 nm | ≤ 2.3 dB/km |
| Attenuation @ 1300 nm | ≤ 0.6 dB/km |
| Operating Temperature | -10 to 60 °C (14 to 140 °F) |
| Storage Temperature | -10 to 70 °C (14 to 158 °F) |
| Standards Compliance | MPO interface standards, OM4/MMF, RoHS compliant |
| Applications | 2×400G to 1×800G fanout, parallel MM backbone, high-speed leaf–spine/inter-switch links |
Why Choose NSComm MPO 16F to 2xMPO 8F APC OM4 Breakout Cables?
-
Designed for 400G/800G fanout – Ideal for aggregating two 400G QSFP-DD/OSFP multimode ports into a single 800G QSFP-DD link.
-
Crossover breakout architecture – Pre-engineered crossover polarity simplifies direct device-to-device parallel optics connections.
-
Lower loss than cassette-based solutions – Direct breakout reduces mated interfaces, improving insertion loss and overall link margin.
-
8° APC angled polish – High return-loss APC interface helps minimize back reflections and maintain clean multimode signals.
-
Bend-insensitive OM4 multimode fiber – Ensures stable performance in tight pathways and dense patch field environments.
-
Riser-rated OFNR construction – Suitable for structured cabling, in-rack routing, and data center riser pathways.
Length Options
Standard stocked lengths:
Available in common trunk and breakout lengths suited for typical 400G/800G switch-to-switch and switch-to-transceiver fanout scenarios within and between racks.
Custom lengths:
Custom trunk lengths, breakout leg lengths, labeling, and connector configurations are available on request to match your panel layouts, routing paths, and optics locations.
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by Certified CCIE / HCIE / RCNP Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your NSComm products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Original: $150.00
-65%$150.00
$52.50Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Overview
The NSComm MPO 16F APC to 2xMPO 8F APC breakout cable is a high-density OM4 multimode splitter solution engineered for 400G/800G data center architectures. With one 16-fiber MPO-16 APC (Female) trunk breaking out to two 8-fiber MPO-8 APC (Female) legs, this assembly supports 16-fiber parallel optics in a compact, factory-terminated form factor that simplifies high-speed backbone design. The MPO-16 APC end features an 8-degree angled polish to deflect internal back reflections away from the transceiver, helping preserve signal integrity at very high line rates.
Built with bend-insensitive OM4 50/125 ÎĽm multimode fiber and a riser-rated OFNR jacket, this crossover breakout cable is purpose-built for linking two 400G QSFP-DD/OSFP multimode transceivers to a single 800G QSFP-DD optics port in high-speed fiber links. Compared with deploying separate breakout cassettes, MPO-based breakout cables reduce the number of mated interfaces, resulting in lower overall insertion loss, reduced latency, and lower material and installation costs, ideal for hyperscale and large enterprise data centers.
Need help validating crossover polarity, channel mapping, or compatibility with your 400G/800G SR8 optics? Contact us now and our team will help review your design before deployment.
Key Specifications
| Specification | Details |
|---|---|
| Vendor Name | NSComm |
| Product Type | MPO 16F APC to 2xMPO 8F APC Multimode Breakout Cable |
| Connector A | MPO-16 APC Female (Pinless) with Offset Key, Low Loss |
| Connector B | 2 Ă— MPO-8 APC Female (Pinless), Low Loss |
| Polish Type | APC to APC, 8° angled endfaces |
| Fiber Mode | OM4 50/125 ÎĽm Multimode |
| Glass Fiber | Bend-insensitive multimode fiber |
| Wavelength | 850 nm / 1300 nm |
| Fiber Count | 16 Fibers total (1Ă—16F trunk to 2Ă—8F breakout) |
| Polarity | Crossover |
| 400G Ethernet Distance | Up to 50/100 m at 850 nm (application dependent) |
| 800G Ethernet Distance | Up to 50 m at 850 nm (application dependent) |
| Cable Outside Diameter (OD) | 3.0 mm (trunk, typical) |
| Cable Jacket | Riser-rated, OFNR |
| Minimum Bend Radius | 7.5 mm |
| Breakout Length | 0.5 m (typical breakout leg length) |
| Installation Tensile Load | 66 N |
| Tensile Strength | 60/120 N (Long/Short Term) |
| Insertion Loss | Low Loss, ≤ 0.35 dB Max (Typ. 0.15 dB) |
| Return Loss | ≥ 45 dB (APC) |
| Attenuation @ 850 nm | ≤ 2.3 dB/km |
| Attenuation @ 1300 nm | ≤ 0.6 dB/km |
| Operating Temperature | -10 to 60 °C (14 to 140 °F) |
| Storage Temperature | -10 to 70 °C (14 to 158 °F) |
| Standards Compliance | MPO interface standards, OM4/MMF, RoHS compliant |
| Applications | 2×400G to 1×800G fanout, parallel MM backbone, high-speed leaf–spine/inter-switch links |
Why Choose NSComm MPO 16F to 2xMPO 8F APC OM4 Breakout Cables?
-
Designed for 400G/800G fanout – Ideal for aggregating two 400G QSFP-DD/OSFP multimode ports into a single 800G QSFP-DD link.
-
Crossover breakout architecture – Pre-engineered crossover polarity simplifies direct device-to-device parallel optics connections.
-
Lower loss than cassette-based solutions – Direct breakout reduces mated interfaces, improving insertion loss and overall link margin.
-
8° APC angled polish – High return-loss APC interface helps minimize back reflections and maintain clean multimode signals.
-
Bend-insensitive OM4 multimode fiber – Ensures stable performance in tight pathways and dense patch field environments.
-
Riser-rated OFNR construction – Suitable for structured cabling, in-rack routing, and data center riser pathways.
Length Options
Standard stocked lengths:
Available in common trunk and breakout lengths suited for typical 400G/800G switch-to-switch and switch-to-transceiver fanout scenarios within and between racks.
Custom lengths:
Custom trunk lengths, breakout leg lengths, labeling, and connector configurations are available on request to match your panel layouts, routing paths, and optics locations.
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by Certified CCIE / HCIE / RCNP Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your NSComm products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
