NSComm MPO 16F APC to 2xMPO 8F APC Breakout Cables, 8 Fibers, Singlemode (OS2, G.657.A1), OFNR, Crossover
Overview
The NSComm MPO 16F APC to 2xMPO 8F APC breakout cable is a high-performance single mode fanout solution designed for 400G/800G data center architectures. With one 16-fiber MPO-16 APC (Female) input and two 8-fiber MPO-8 APC (Female) outputs, it provides a compact splitter assembly for parallel OS2 links where clean signal integrity and efficient fiber utilization are critical. The MPO-16 APC end features an 8-degree angled polish to deflect internal back reflections away from sensitive transceivers, helping to maintain signal quality in high-speed applications.
Built on bend-insensitive G.657.A1 glass and a riser-rated OFNR jacket, this crossover breakout cable is ideally suited for linking two 400G QSFP-DD/OSFP transceivers to a single 800G QSFP-DD transceiver in high-speed leaf–spine or spine–core connections. Compared with using separate breakout cassettes, MPO breakout cables reduce interconnect points, lower overall insertion loss, and offer a more cost-effective, space-saving approach for structured cabling in modern data centers.
Need assistance verifying crossover polarity, fiber mapping, or 400G/800G optics compatibility? Contact us now and our team will help validate your design before deployment.
Key Specifications
| Specification | Details |
|---|---|
| Vendor Name | NSComm |
| Product Type | MPO 16F APC to 2xMPO 8F APC Singlemode Breakout Cable |
| Connector A | MPO-16 APC Female (Pinless) with Offset Key, Low Loss |
| Connector B | 2 × MPO-8 APC Female (Pinless), Low Loss |
| Polish Type | APC to APC, 8° angled endfaces |
| Glass Fiber | G.657.A1 bend-insensitive single mode |
| Fiber Mode | OS2 9/125 μm |
| Wavelength | 1310 nm / 1550 nm |
| Fiber Count | 16 Fibers total (1×16F trunk to 2×8F breakout) |
| Polarity | Crossover |
| Cable Outside Diameter (OD) | 3.0 mm (trunk, typical) |
| Cable Jacket | Riser-rated, OFNR |
| Minimum Bend Radius | 10 mm |
| Breakout Length | 0.5 m (typical breakout leg length) |
| Installation Tensile Load | 66 N |
| Tensile Strength | 60/120 N (Long/Short Term) |
| Insertion Loss | Low Loss, ≤ 0.35 dB Max (Typ. 0.15 dB) |
| Return Loss | ≥ 65 dB (APC) |
| Attenuation @ 1310 nm | ≤ 0.32 dB/km |
| Attenuation @ 1550 nm | ≤ 0.18 dB/km |
| Operating Temperature | -10 to 60 °C (14 to 140 °F) |
| Storage Temperature | -10 to 70 °C (14 to 158 °F) |
| Standards Compliance | MPO interface standards, OS2, RoHS compliant |
| Applications | 2×400G to 1×800G fanout, high-speed SM breakout for QSFP-DD/OSFP links in leaf–spine DCs |
Why Choose NSComm MPO 16F to 2xMPO 8F APC Breakout Cables?
-
Optimized for 400G/800G fanout – Designed to link two 400G QSFP-DD/OSFP transceivers to a single 800G QSFP-DD optics port.
-
Crossover breakout design – Pre-engineered crossover polarity simplifies direct device-to-device connectivity in parallel optics links.
-
Lower loss vs. cassette-based solutions – Direct breakout architecture reduces interconnect points and overall insertion loss.
-
High return loss APC performance – 8° angled APC endfaces help suppress back reflections for cleaner high-speed signals.
-
Bend-insensitive OS2 G.657.A1 fiber – Supports tight routing and high-density cable management in modern data center racks.
-
Riser-rated OFNR construction – Suitable for in-cabinet routing and structured cabling in large-scale enterprise and cloud environments.
Length Options
Standard stocked lengths:
Available in common trunk and breakout lengths tailored for typical 400G/800G switch-to-switch and switch-to-transceiver fanout scenarios.
Custom lengths:
Custom trunk lengths, breakout leg lengths, labeling, and configurations are available on request to align with your panel layouts, trunk designs, and transceiver locations.
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by Certified CCIE / HCIE / RCNP Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
NSComm MPO 16F APC to 2xMPO 8F APC Breakout Cables, 8 Fibers, Singlemode (OS2, G.657.A1), OFNR, Crossover
NSComm MPO 16F APC to 2xMPO 8F APC Breakout Cables, 8 Fibers, Singlemode (OS2, G.657.A1), OFNR, Crossover
Overview
The NSComm MPO 16F APC to 2xMPO 8F APC breakout cable is a high-performance single mode fanout solution designed for 400G/800G data center architectures. With one 16-fiber MPO-16 APC (Female) input and two 8-fiber MPO-8 APC (Female) outputs, it provides a compact splitter assembly for parallel OS2 links where clean signal integrity and efficient fiber utilization are critical. The MPO-16 APC end features an 8-degree angled polish to deflect internal back reflections away from sensitive transceivers, helping to maintain signal quality in high-speed applications.
Built on bend-insensitive G.657.A1 glass and a riser-rated OFNR jacket, this crossover breakout cable is ideally suited for linking two 400G QSFP-DD/OSFP transceivers to a single 800G QSFP-DD transceiver in high-speed leaf–spine or spine–core connections. Compared with using separate breakout cassettes, MPO breakout cables reduce interconnect points, lower overall insertion loss, and offer a more cost-effective, space-saving approach for structured cabling in modern data centers.
Need assistance verifying crossover polarity, fiber mapping, or 400G/800G optics compatibility? Contact us now and our team will help validate your design before deployment.
Key Specifications
| Specification | Details |
|---|---|
| Vendor Name | NSComm |
| Product Type | MPO 16F APC to 2xMPO 8F APC Singlemode Breakout Cable |
| Connector A | MPO-16 APC Female (Pinless) with Offset Key, Low Loss |
| Connector B | 2 × MPO-8 APC Female (Pinless), Low Loss |
| Polish Type | APC to APC, 8° angled endfaces |
| Glass Fiber | G.657.A1 bend-insensitive single mode |
| Fiber Mode | OS2 9/125 μm |
| Wavelength | 1310 nm / 1550 nm |
| Fiber Count | 16 Fibers total (1×16F trunk to 2×8F breakout) |
| Polarity | Crossover |
| Cable Outside Diameter (OD) | 3.0 mm (trunk, typical) |
| Cable Jacket | Riser-rated, OFNR |
| Minimum Bend Radius | 10 mm |
| Breakout Length | 0.5 m (typical breakout leg length) |
| Installation Tensile Load | 66 N |
| Tensile Strength | 60/120 N (Long/Short Term) |
| Insertion Loss | Low Loss, ≤ 0.35 dB Max (Typ. 0.15 dB) |
| Return Loss | ≥ 65 dB (APC) |
| Attenuation @ 1310 nm | ≤ 0.32 dB/km |
| Attenuation @ 1550 nm | ≤ 0.18 dB/km |
| Operating Temperature | -10 to 60 °C (14 to 140 °F) |
| Storage Temperature | -10 to 70 °C (14 to 158 °F) |
| Standards Compliance | MPO interface standards, OS2, RoHS compliant |
| Applications | 2×400G to 1×800G fanout, high-speed SM breakout for QSFP-DD/OSFP links in leaf–spine DCs |
Why Choose NSComm MPO 16F to 2xMPO 8F APC Breakout Cables?
-
Optimized for 400G/800G fanout – Designed to link two 400G QSFP-DD/OSFP transceivers to a single 800G QSFP-DD optics port.
-
Crossover breakout design – Pre-engineered crossover polarity simplifies direct device-to-device connectivity in parallel optics links.
-
Lower loss vs. cassette-based solutions – Direct breakout architecture reduces interconnect points and overall insertion loss.
-
High return loss APC performance – 8° angled APC endfaces help suppress back reflections for cleaner high-speed signals.
-
Bend-insensitive OS2 G.657.A1 fiber – Supports tight routing and high-density cable management in modern data center racks.
-
Riser-rated OFNR construction – Suitable for in-cabinet routing and structured cabling in large-scale enterprise and cloud environments.
Length Options
Standard stocked lengths:
Available in common trunk and breakout lengths tailored for typical 400G/800G switch-to-switch and switch-to-transceiver fanout scenarios.
Custom lengths:
Custom trunk lengths, breakout leg lengths, labeling, and configurations are available on request to align with your panel layouts, trunk designs, and transceiver locations.
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by Certified CCIE / HCIE / RCNP Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Overview
The NSComm MPO 16F APC to 2xMPO 8F APC breakout cable is a high-performance single mode fanout solution designed for 400G/800G data center architectures. With one 16-fiber MPO-16 APC (Female) input and two 8-fiber MPO-8 APC (Female) outputs, it provides a compact splitter assembly for parallel OS2 links where clean signal integrity and efficient fiber utilization are critical. The MPO-16 APC end features an 8-degree angled polish to deflect internal back reflections away from sensitive transceivers, helping to maintain signal quality in high-speed applications.
Built on bend-insensitive G.657.A1 glass and a riser-rated OFNR jacket, this crossover breakout cable is ideally suited for linking two 400G QSFP-DD/OSFP transceivers to a single 800G QSFP-DD transceiver in high-speed leaf–spine or spine–core connections. Compared with using separate breakout cassettes, MPO breakout cables reduce interconnect points, lower overall insertion loss, and offer a more cost-effective, space-saving approach for structured cabling in modern data centers.
Need assistance verifying crossover polarity, fiber mapping, or 400G/800G optics compatibility? Contact us now and our team will help validate your design before deployment.
Key Specifications
| Specification | Details |
|---|---|
| Vendor Name | NSComm |
| Product Type | MPO 16F APC to 2xMPO 8F APC Singlemode Breakout Cable |
| Connector A | MPO-16 APC Female (Pinless) with Offset Key, Low Loss |
| Connector B | 2 × MPO-8 APC Female (Pinless), Low Loss |
| Polish Type | APC to APC, 8° angled endfaces |
| Glass Fiber | G.657.A1 bend-insensitive single mode |
| Fiber Mode | OS2 9/125 μm |
| Wavelength | 1310 nm / 1550 nm |
| Fiber Count | 16 Fibers total (1×16F trunk to 2×8F breakout) |
| Polarity | Crossover |
| Cable Outside Diameter (OD) | 3.0 mm (trunk, typical) |
| Cable Jacket | Riser-rated, OFNR |
| Minimum Bend Radius | 10 mm |
| Breakout Length | 0.5 m (typical breakout leg length) |
| Installation Tensile Load | 66 N |
| Tensile Strength | 60/120 N (Long/Short Term) |
| Insertion Loss | Low Loss, ≤ 0.35 dB Max (Typ. 0.15 dB) |
| Return Loss | ≥ 65 dB (APC) |
| Attenuation @ 1310 nm | ≤ 0.32 dB/km |
| Attenuation @ 1550 nm | ≤ 0.18 dB/km |
| Operating Temperature | -10 to 60 °C (14 to 140 °F) |
| Storage Temperature | -10 to 70 °C (14 to 158 °F) |
| Standards Compliance | MPO interface standards, OS2, RoHS compliant |
| Applications | 2×400G to 1×800G fanout, high-speed SM breakout for QSFP-DD/OSFP links in leaf–spine DCs |
Why Choose NSComm MPO 16F to 2xMPO 8F APC Breakout Cables?
-
Optimized for 400G/800G fanout – Designed to link two 400G QSFP-DD/OSFP transceivers to a single 800G QSFP-DD optics port.
-
Crossover breakout design – Pre-engineered crossover polarity simplifies direct device-to-device connectivity in parallel optics links.
-
Lower loss vs. cassette-based solutions – Direct breakout architecture reduces interconnect points and overall insertion loss.
-
High return loss APC performance – 8° angled APC endfaces help suppress back reflections for cleaner high-speed signals.
-
Bend-insensitive OS2 G.657.A1 fiber – Supports tight routing and high-density cable management in modern data center racks.
-
Riser-rated OFNR construction – Suitable for in-cabinet routing and structured cabling in large-scale enterprise and cloud environments.
Length Options
Standard stocked lengths:
Available in common trunk and breakout lengths tailored for typical 400G/800G switch-to-switch and switch-to-transceiver fanout scenarios.
Custom lengths:
Custom trunk lengths, breakout leg lengths, labeling, and configurations are available on request to align with your panel layouts, trunk designs, and transceiver locations.
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by Certified CCIE / HCIE / RCNP Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
