Cisco Industrial IE2000-8TC-G-E Rugged 8x10/100 +2x1G Combo Switch
Cisco IE2000-8TC-G-E Rugged LAN Base Switch
The Cisco® Industrial Ethernet 2000-8TC-G-E is a compact, ruggedized LAN Base switch engineered for demanding U.S. industrial networks—from Chicago transit control centers to Texas oilfields.
It delivers eight auto-sensing 10/100 Mbps RJ-45 downlink ports plus two 100/1000 Mbps combo SFP/RJ-45 uplinks in a fanless, convection-cooled chassis.
With dual-input DC power, alarm I/O and a DIN-rail mount, it combines enterprise-grade security and Cisco Resilient Ethernet Protocol (REP) for sub-second failover in harsh environments
Overview
Highlights
-
Ports & Uplinks
8 × 10/100 Mbps RJ-45 downlinks + 2 × 100/1000 Mbps combo SFP/RJ-45 uplinks in a single 10-port chassis. -
Compact Rugged Design
IP30-rated metal housing, fanless convection cooling, and extended –40 °C to +75 °C operating range for reliable performance in extreme U.S. facilities. -
Switching Performance
Up to 7.6 Gbps of switching bandwidth and a 3.8 Gbps forwarding bandwidth with wire-speed 5.66 Mpps packet handling. -
High Availability & Resiliency
Cisco REP ring protocol and Media Redundancy Protocol (MRP) deliver sub-second network failover for mission-critical applications. -
Enterprise-Grade Security
802.1X port-based authentication, DHCP snooping, Dynamic ARP Inspection, IP Source Guard, port security, SSHv2, SNMPv3, BPDU Guard, RADIUS/TACACS+. -
Flexible Management
Zero-touch express setup via DHCP, Web Device Manager, Cisco Catalyst Center, CLI, Telnet/HTTPS, SNMP, and USB/SD flash for rapid U.S. site provisioning. -
Industrial Protocol & Standards
EtherNet/IP, PROFINET, IEEE 1588v2 PTP for synchronized automation; UL/CSA 60950-1, EN 60950-1, CB IEC 60950-1, NEMA TS-2, Marine DNV, Substation KEMA, Railway EN 50155, IP30 certified.
Recommended Accessories
| Accessory | Category | Description |
|---|---|---|
| PWR-IE50W-AC= | Power Supply | 50 W AC/DC (100–240 VAC/1.25 A or 125–250 VDC/1.25 A); no PoE support |
| PWR-IE50W-AC-L= | Hazard-Location Power Supply | 50 W AC (100–240 VAC/1.2 A/50–60 Hz); IP20 rated for non-hazardous zones |
| SD-IE-1GB= | Removable Storage | 1 GB ruggedized SD memory card for configuration and firmware |
| STK-RACK-DINRAIL= | Mounting Hardware | 19″ DIN-rail mount kit for industrial racks and cabinets |
Comparison with Similar Models
| Feature | IE-2000-4TC-G-E | IE-2000-8TC-G-E | IE-2000-16TC-G-E |
|---|---|---|---|
| Ports & Uplinks | 4 × 10/100 RJ-45 + 2 × 100/1000 combo | 8 × 10/100 RJ-45 + 2 × 100/1000 combo | 16 × 10/100 RJ-45 + 2 × 100/1000 combo |
| Switching Capacity | 7.6 Gbps | 7.6 Gbps | 7.6 Gbps |
| Forwarding Rate | 5.66 Mpps | 5.66 Mpps | 5.66 Mpps |
| Power Consumption | 9.5–15 W | 12.5–20 W | 21–30 W |
| Operating Range | –40 °C to +75 °C; IP30 | –40 °C to +75 °C; IP30 | –40 °C to +75 °C; IP30 |
| Ideal Use Case | Compact I/O aggregation at remote sites | Mid-density industrial edge aggregation | High-density industrial backbone access |
Specifications
| Parameter | Specification |
|---|---|
| Product Code | IE-2000-8TC-G-E |
| Feature Set | Cisco IOS LAN Base |
| Downlink Ports | 8 × 10/100 Mbps RJ-45 |
| Uplink Interfaces | 2 × 100/1000 Mbps SFP/RJ-45 combo |
| Maximum Switching Bandwidth | 7.6 Gbps full-duplex |
| Maximum Forwarding Bandwidth | 3.8 Gbps |
| Forwarding Rate | 5.66 Mpps (64-byte packets) |
| Packet Buffer | 2 MB |
| MAC Address Table | 8,000 entries |
| VLANs | Up to 1,005 |
| NAT Entries | 128 translation entries |
| IPv4 / IPv6 Routes | 3,500 / 1,750 routes |
| DRAM / Flash / SD Card | 256 MB DRAM with ECC; 64 MB on-board Flash; optional 1 GB SD card |
| Alarm I/O | 2 dry-contact inputs; 1 Form-C output relay |
| Console Ports | Mini-USB and RS-232 RJ-45 |
| Power Input | Dual-input: 100–240 VAC/1.25 A or 125–250 VDC/1.25 A |
| Power Consumption | 12.5–20 W (excluding PoE) |
| Dimensions (H × W × D) | 5.1″ × 3.6″ × 5.26″ (130 × 91.4 × 134 mm) |
| Weight | 3.45 lb (1.56 kg) |
| Operating Temperature | –40 °C to +75 °C |
| Operating Humidity | 0–100% condensing |
| Certifications & Compliance | UL/CSA 60950-1, EN 60950-1, CB IEC 60950-1, NEMA TS-2, Marine DNV, Substation KEMA, Railway EN 50155, ISO 12944-6, IP30, EtherNet/IP, PROFINET |
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by CCIE Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Cisco Industrial IE2000-8TC-G-E Rugged 8x10/100 +2x1G Combo Switch
Cisco Industrial IE2000-8TC-G-E Rugged 8x10/100 +2x1G Combo Switch
Cisco IE2000-8TC-G-E Rugged LAN Base Switch
The Cisco® Industrial Ethernet 2000-8TC-G-E is a compact, ruggedized LAN Base switch engineered for demanding U.S. industrial networks—from Chicago transit control centers to Texas oilfields.
It delivers eight auto-sensing 10/100 Mbps RJ-45 downlink ports plus two 100/1000 Mbps combo SFP/RJ-45 uplinks in a fanless, convection-cooled chassis.
With dual-input DC power, alarm I/O and a DIN-rail mount, it combines enterprise-grade security and Cisco Resilient Ethernet Protocol (REP) for sub-second failover in harsh environments
Overview
Highlights
-
Ports & Uplinks
8 × 10/100 Mbps RJ-45 downlinks + 2 × 100/1000 Mbps combo SFP/RJ-45 uplinks in a single 10-port chassis. -
Compact Rugged Design
IP30-rated metal housing, fanless convection cooling, and extended –40 °C to +75 °C operating range for reliable performance in extreme U.S. facilities. -
Switching Performance
Up to 7.6 Gbps of switching bandwidth and a 3.8 Gbps forwarding bandwidth with wire-speed 5.66 Mpps packet handling. -
High Availability & Resiliency
Cisco REP ring protocol and Media Redundancy Protocol (MRP) deliver sub-second network failover for mission-critical applications. -
Enterprise-Grade Security
802.1X port-based authentication, DHCP snooping, Dynamic ARP Inspection, IP Source Guard, port security, SSHv2, SNMPv3, BPDU Guard, RADIUS/TACACS+. -
Flexible Management
Zero-touch express setup via DHCP, Web Device Manager, Cisco Catalyst Center, CLI, Telnet/HTTPS, SNMP, and USB/SD flash for rapid U.S. site provisioning. -
Industrial Protocol & Standards
EtherNet/IP, PROFINET, IEEE 1588v2 PTP for synchronized automation; UL/CSA 60950-1, EN 60950-1, CB IEC 60950-1, NEMA TS-2, Marine DNV, Substation KEMA, Railway EN 50155, IP30 certified.
Recommended Accessories
| Accessory | Category | Description |
|---|---|---|
| PWR-IE50W-AC= | Power Supply | 50 W AC/DC (100–240 VAC/1.25 A or 125–250 VDC/1.25 A); no PoE support |
| PWR-IE50W-AC-L= | Hazard-Location Power Supply | 50 W AC (100–240 VAC/1.2 A/50–60 Hz); IP20 rated for non-hazardous zones |
| SD-IE-1GB= | Removable Storage | 1 GB ruggedized SD memory card for configuration and firmware |
| STK-RACK-DINRAIL= | Mounting Hardware | 19″ DIN-rail mount kit for industrial racks and cabinets |
Comparison with Similar Models
| Feature | IE-2000-4TC-G-E | IE-2000-8TC-G-E | IE-2000-16TC-G-E |
|---|---|---|---|
| Ports & Uplinks | 4 × 10/100 RJ-45 + 2 × 100/1000 combo | 8 × 10/100 RJ-45 + 2 × 100/1000 combo | 16 × 10/100 RJ-45 + 2 × 100/1000 combo |
| Switching Capacity | 7.6 Gbps | 7.6 Gbps | 7.6 Gbps |
| Forwarding Rate | 5.66 Mpps | 5.66 Mpps | 5.66 Mpps |
| Power Consumption | 9.5–15 W | 12.5–20 W | 21–30 W |
| Operating Range | –40 °C to +75 °C; IP30 | –40 °C to +75 °C; IP30 | –40 °C to +75 °C; IP30 |
| Ideal Use Case | Compact I/O aggregation at remote sites | Mid-density industrial edge aggregation | High-density industrial backbone access |
Specifications
| Parameter | Specification |
|---|---|
| Product Code | IE-2000-8TC-G-E |
| Feature Set | Cisco IOS LAN Base |
| Downlink Ports | 8 × 10/100 Mbps RJ-45 |
| Uplink Interfaces | 2 × 100/1000 Mbps SFP/RJ-45 combo |
| Maximum Switching Bandwidth | 7.6 Gbps full-duplex |
| Maximum Forwarding Bandwidth | 3.8 Gbps |
| Forwarding Rate | 5.66 Mpps (64-byte packets) |
| Packet Buffer | 2 MB |
| MAC Address Table | 8,000 entries |
| VLANs | Up to 1,005 |
| NAT Entries | 128 translation entries |
| IPv4 / IPv6 Routes | 3,500 / 1,750 routes |
| DRAM / Flash / SD Card | 256 MB DRAM with ECC; 64 MB on-board Flash; optional 1 GB SD card |
| Alarm I/O | 2 dry-contact inputs; 1 Form-C output relay |
| Console Ports | Mini-USB and RS-232 RJ-45 |
| Power Input | Dual-input: 100–240 VAC/1.25 A or 125–250 VDC/1.25 A |
| Power Consumption | 12.5–20 W (excluding PoE) |
| Dimensions (H × W × D) | 5.1″ × 3.6″ × 5.26″ (130 × 91.4 × 134 mm) |
| Weight | 3.45 lb (1.56 kg) |
| Operating Temperature | –40 °C to +75 °C |
| Operating Humidity | 0–100% condensing |
| Certifications & Compliance | UL/CSA 60950-1, EN 60950-1, CB IEC 60950-1, NEMA TS-2, Marine DNV, Substation KEMA, Railway EN 50155, ISO 12944-6, IP30, EtherNet/IP, PROFINET |
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by CCIE Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Cisco IE2000-8TC-G-E Rugged LAN Base Switch
The Cisco® Industrial Ethernet 2000-8TC-G-E is a compact, ruggedized LAN Base switch engineered for demanding U.S. industrial networks—from Chicago transit control centers to Texas oilfields.
It delivers eight auto-sensing 10/100 Mbps RJ-45 downlink ports plus two 100/1000 Mbps combo SFP/RJ-45 uplinks in a fanless, convection-cooled chassis.
With dual-input DC power, alarm I/O and a DIN-rail mount, it combines enterprise-grade security and Cisco Resilient Ethernet Protocol (REP) for sub-second failover in harsh environments
Overview
Highlights
-
Ports & Uplinks
8 × 10/100 Mbps RJ-45 downlinks + 2 × 100/1000 Mbps combo SFP/RJ-45 uplinks in a single 10-port chassis. -
Compact Rugged Design
IP30-rated metal housing, fanless convection cooling, and extended –40 °C to +75 °C operating range for reliable performance in extreme U.S. facilities. -
Switching Performance
Up to 7.6 Gbps of switching bandwidth and a 3.8 Gbps forwarding bandwidth with wire-speed 5.66 Mpps packet handling. -
High Availability & Resiliency
Cisco REP ring protocol and Media Redundancy Protocol (MRP) deliver sub-second network failover for mission-critical applications. -
Enterprise-Grade Security
802.1X port-based authentication, DHCP snooping, Dynamic ARP Inspection, IP Source Guard, port security, SSHv2, SNMPv3, BPDU Guard, RADIUS/TACACS+. -
Flexible Management
Zero-touch express setup via DHCP, Web Device Manager, Cisco Catalyst Center, CLI, Telnet/HTTPS, SNMP, and USB/SD flash for rapid U.S. site provisioning. -
Industrial Protocol & Standards
EtherNet/IP, PROFINET, IEEE 1588v2 PTP for synchronized automation; UL/CSA 60950-1, EN 60950-1, CB IEC 60950-1, NEMA TS-2, Marine DNV, Substation KEMA, Railway EN 50155, IP30 certified.
Recommended Accessories
| Accessory | Category | Description |
|---|---|---|
| PWR-IE50W-AC= | Power Supply | 50 W AC/DC (100–240 VAC/1.25 A or 125–250 VDC/1.25 A); no PoE support |
| PWR-IE50W-AC-L= | Hazard-Location Power Supply | 50 W AC (100–240 VAC/1.2 A/50–60 Hz); IP20 rated for non-hazardous zones |
| SD-IE-1GB= | Removable Storage | 1 GB ruggedized SD memory card for configuration and firmware |
| STK-RACK-DINRAIL= | Mounting Hardware | 19″ DIN-rail mount kit for industrial racks and cabinets |
Comparison with Similar Models
| Feature | IE-2000-4TC-G-E | IE-2000-8TC-G-E | IE-2000-16TC-G-E |
|---|---|---|---|
| Ports & Uplinks | 4 × 10/100 RJ-45 + 2 × 100/1000 combo | 8 × 10/100 RJ-45 + 2 × 100/1000 combo | 16 × 10/100 RJ-45 + 2 × 100/1000 combo |
| Switching Capacity | 7.6 Gbps | 7.6 Gbps | 7.6 Gbps |
| Forwarding Rate | 5.66 Mpps | 5.66 Mpps | 5.66 Mpps |
| Power Consumption | 9.5–15 W | 12.5–20 W | 21–30 W |
| Operating Range | –40 °C to +75 °C; IP30 | –40 °C to +75 °C; IP30 | –40 °C to +75 °C; IP30 |
| Ideal Use Case | Compact I/O aggregation at remote sites | Mid-density industrial edge aggregation | High-density industrial backbone access |
Specifications
| Parameter | Specification |
|---|---|
| Product Code | IE-2000-8TC-G-E |
| Feature Set | Cisco IOS LAN Base |
| Downlink Ports | 8 × 10/100 Mbps RJ-45 |
| Uplink Interfaces | 2 × 100/1000 Mbps SFP/RJ-45 combo |
| Maximum Switching Bandwidth | 7.6 Gbps full-duplex |
| Maximum Forwarding Bandwidth | 3.8 Gbps |
| Forwarding Rate | 5.66 Mpps (64-byte packets) |
| Packet Buffer | 2 MB |
| MAC Address Table | 8,000 entries |
| VLANs | Up to 1,005 |
| NAT Entries | 128 translation entries |
| IPv4 / IPv6 Routes | 3,500 / 1,750 routes |
| DRAM / Flash / SD Card | 256 MB DRAM with ECC; 64 MB on-board Flash; optional 1 GB SD card |
| Alarm I/O | 2 dry-contact inputs; 1 Form-C output relay |
| Console Ports | Mini-USB and RS-232 RJ-45 |
| Power Input | Dual-input: 100–240 VAC/1.25 A or 125–250 VDC/1.25 A |
| Power Consumption | 12.5–20 W (excluding PoE) |
| Dimensions (H × W × D) | 5.1″ × 3.6″ × 5.26″ (130 × 91.4 × 134 mm) |
| Weight | 3.45 lb (1.56 kg) |
| Operating Temperature | –40 °C to +75 °C |
| Operating Humidity | 0–100% condensing |
| Certifications & Compliance | UL/CSA 60950-1, EN 60950-1, CB IEC 60950-1, NEMA TS-2, Marine DNV, Substation KEMA, Railway EN 50155, ISO 12944-6, IP30, EtherNet/IP, PROFINET |
More Details
Quality Certifications
Warranty
100% Low Price Guarantee
Network-switch.com provides high-quality products at low wholesale prices
100% Quality Assurance
All items are ORIGINAL and GENUINE only.
Item conditions are "New Sealed". They are fully tested by CCIE Engineers.
Free Technical Support
Our FREE Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Warranty Policy
Original New Sealed Enterprise Hardware: 3 Years
Original New Sealed Consumer Devices: 1 Year
The Support Contacts
If your Cisco products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
